Ampacity and Engineering Aspects of MV and (E)HV Power Cables training course

Two-day training course providing an insight into calculating the ampacity of MV and (E)HV cable systems. The course also covers various important subject areas relevant to the detailed engineering of cable systems.

Do you have questions regarding your cable system's ampacity or current rating? Or about the detailed design of cable systems or the potential additional possibilities for existing cable systems? Do you design or verify the design of cable systems? Then this course is definitely for you!

With the increasingly widespread use of underground and submarine power cables, proper design and engineering of power cable systems becomes more and more important. A very important topic in the design and engineering of these systems is the ampacity of power cables, which can appear to be surprisingly good over the short term, but surprisingly poor over the long term or at very specific spots (therminal bottleneck). The objective of this course is to provide insight and methodologies designed to determine the ampacity in a proper way, as well as to cover the various topics that play a major role during the design and engineering phase.

This in-depth practical two-day training course is part of a series of courses on power cables, consisting of a general three-day course, Power cables in general and several in-depth two- and three-day courses, providing more detailed information on the following topics:


Subjects:

  • Engineering aspects of power cable systems and guidelines
  • Cable installation design
  • Current rating (continuous and dynamic)
  • Thermal aspects
  • Short-circuit behavior
  • Magnetic fields
  • Asset management Aspects

Target Audience:

Anyone involved (or to be involved) with power cables in the course of their daily work. It is recommended that the participants hold at least a Bachelor of Engineering degree or have a certain foreknowledge of power cables. The Power cables in general course is a recommended preparation, but not a requirement.

Next to underground power cable courses, DNV also offers three courses in the field of HVDC and submarine power cables:

For more information about this training course please refer to the leaflet.

On request, Energy Academy can also provide an in-company training course in English or Dutch (content, location and duration of the course can be adapted to the client’s wishes). Please contact us for more information.

Do you have questions regarding your cable system's ampacity or current rating? Or about the detailed design of cable systems or the potential additional possibilities for existing cable systems? Do you design or verify the design of cable systems? Then this course is definitely for you!

With the increasingly widespread use of underground and submarine power cables, proper design and engineering of power cable systems becomes more and more important. A very important topic in the design and engineering of these systems is the ampacity of power cables, which can appear to be surprisingly good over the short term, but surprisingly poor over the long term or at very specific spots (therminal bottleneck). The objective of this course is to provide insight and methodologies designed to determine the ampacity in a proper way, as well as to cover the various topics that play a major role during the design and engineering phase.

This in-depth practical two-day training course is part of a series of courses on power cables, consisting of a general three-day course, Power cables in general and several in-depth two- and three-day courses, providing more detailed information on the following topics:


Subjects:

  • Engineering aspects of power cable systems and guidelines
  • Cable installation design
  • Current rating (continuous and dynamic)
  • Thermal aspects
  • Short-circuit behavior
  • Magnetic fields
  • Asset management Aspects

Target Audience:

Anyone involved (or to be involved) with power cables in the course of their daily work. It is recommended that the participants hold at least a Bachelor of Engineering degree or have a certain foreknowledge of power cables. The Power cables in general course is a recommended preparation, but not a requirement.

Next to underground power cable courses, DNV also offers three courses in the field of HVDC and submarine power cables:

For more information about this training course please refer to the leaflet.

On request, Energy Academy can also provide an in-company training course in English or Dutch (content, location and duration of the course can be adapted to the client’s wishes). Please contact us for more information.

Date Location Language Fee Register

Date

10-11 December 2024

Location

Arnhem, the Netherlands

Language

English

Fee

EUR 2110 (early bird EUR 2000)

Register

Very practical course, it gives you in a relative short time the most essential knowledge to be a good speaking partner in cable projects for manufacturers, installers and network companies''

  • Jan Maas
  • ,
  • DELTA E & M

Do you need more information?

  Ampacity and Engineering Aspects of MV and (E)HV Power Cables training course leaflet

Ampacity and Engineering Aspects of MV and (E)HV Power Cables training course leaflet

Download

  Energy Academy leaflet

Energy Academy leaflet

Download

 

Training overview

Download an overview of our open enrolment courses

 

Energy Academy newsletter

Subscribe to our newsletter

 

Tailor-made courses

Request an in-house or customised training course

Find out about our training courses in other sectors

 

Maritime Academy

Explore the maritime training courses

 

Oil & Gas Academy

Explore the oil & gas training courses

 

Business Assurance Academy

Explore the business assurance training courses

 

Software Academy

Explore the software training courses